MongoTV_23300 - AirportSim - Part 2 - Tutorials

Fra Mongopedia, den uofficielle MongoTV-fanwiki · genereret automatisk

1. sep. 2026 · Gaming · 1:06:09 · YouTube ↗

Resumé

0:20MongoTV spiller AirportSim, et lufthavns-håndteringsspil, og gennemgår tutorials om at sikre et fly ved gate med kiler og kegler, fjerne bypass-pinnen, og om hvordan man bruger GPU'en og passagertrappen. Det meste af stykket er spillets egen tutorial-stemme på engelsk; MongoTV selv siger kun få ting i videoens start om, at spillet er svært, at han har det lidt træt og varmt, og at han vil spille mere senere i dag eller i morgen.
AirportSim · tutorials · spil · GPU · flyservice · på stream

30:19Denne del af videoen består næsten kun af spilforklaringer fra AirportSim, hvor en tutorial-stemme beskriver at placere køretøjer ved flyet og åbne døren, samt gentagne "Heat"-råb fra spillet. MongoTV selv taler ikke i transcriptet; ifølge beskrivelsen er han lidt træt og varm i dag og vil have en pause fra tutorials, og han vil spille mere senere eller i morgen. Han synes dog spillet ser flot ud.
AirportSim · tutorials · grundhåndtering · gaming · spilforklaringer

1:00:34Denne del af videoen indeholder næsten ingen tale: transskriptionen består kun af korte ord som "Heat", sandsynligvis fra spillets tutorial eller lyd. Der er ingen livsbegivenheder, planer eller udtalelser fra MongoTV i dette afsnit, så intet registreres fra hans eget liv.
AirportSim · tutorials · spil

Det sker i videoen

  • 1. september 2026Gaming
    MongoTV fortæller i videoens beskrivelse, at AirportSim er svært, at der er meget at lære, og at han vil prøve tutorials 1-3 gange. Han er lidt træt og varm i dag og vil have en pause, og han vil spille mere senere i dag eller i morgen.
    “i feel a bit tired and hot today” (i dag)

Transskription

YouTubes automatiske undertekster; kan være upræcise.

0:20 In this tutorial, you will learn how to secure an aircraft in its place at a gate following standard safety procedures. You will do this with the use of chocks

0:32 to be placed under all the aircraft's wheels and cones to be placed at critical areas around the aircraft where we do not want curious passengers or unauthorized personnel approaching. As you can see, a plane is approaching the gate. Collect a full set of wheel chocks at the indicated area.

1:29 The aircraft has arrived at the gate and

1:32 its engines and all beacon lights are switched off. You may safely approach the aircraft's front set of wheels. Place a set of chocks under the wheels. To do this, approach and point at the front wheels and press the displayed button to place a set of chocks. Great. I think you've got the hang of it. Repeat the same process for the rear left and right wheel sets.

2:03 Now, head over to the indicated set of cones. To raise them, press the displayed button. Click the displayed button to rotate them upwards and use the displayed button to position them. To throw the object, hold down the displayed button.

2:31 Just like with the chocks, place the cones in their indicated areas. The order in which you do this doesn't matter.

3:31 Now the bypass pin needs to be inserted into its slot on the strut of the front wheels. The purpose of this pin is to prevent the cockpit crew from having any steering control of this wheel as it can pose a danger to the crew on the ground if moved accidentally. It also allows the ground crew to take control of steering of the aircraft by bypassing the aircraft's pressurized

4:00 hydraulic systems during a pushback procedure. You'll learn more about this in another tutorial. Now approach the front wheel and firmly insert the bypass pin in its slot indicated by the marker. Congratulations, you have just prepared and secured the aircraft for parking and further

4:31 servicing. Now we will present you with the same scenario but in reverse. You will need to collect all the previously placed safety articles efficiently and safely. At Vagar airport, we have a unique situation where an aircraft can leave the stand and taxi without being pushed back onto the taxi way. This means the final step of this process will be taking the bypass pin out of the front

5:01 gear strut and the aircraft can go on its way. The aircraft has already been serviced and is waiting for it to be released from the ground crew's hands. Each parking gate or parking stand is identified by a red or white perimeter outline. When the aircraft is in motion and its engines are running, no unnecessary objects, vehicles or personnel should be inside this area. This is due to the

5:32 risk of the aircraft colliding with a vehicle or unwanted objects being sucked into the engine. If such a situation occurs and the area is not clear, you'll be notified through your in-game tablet. Collect the cones and wheelchocks and place them in safe areas outside the parking stands perimeter. Finally, head back over to the aircraft,

6:00 remove the bypass pin, and leave the area.

9:05 Congratulations, you have completed the training on securing an aircraft when parked at a gate.

9:40 Now I'll teach you how to operate a ground power unit which is known as GPU in aviation jargon. You're probably wondering what exactly does the GPU do? Besides what its name gives away, let me explain that to you. After landing, the aircraft generates electricity from the

10:00 engines. But as you may have noticed, the aircraft shuts down its engines faster than we can connect and start the GPU. Shortly after landing, the crews start the auxiliary power unit or APU for short, which will generate electricity for the aircraft until we, the ground handling crew, connect the GPU to the aircraft, which will power the aircraft more efficiently and at a lower fuel price. During this time, the cockpit crew and

10:31 ground handling can perform their assigned tasks without a cut in power to the aircraft. Okay, now you need to use the tug parked in the marked area and transport the GPU to the position next to the aircraft. There's already an aircraft parked there which is scheduled to depart soon. This will give us a chance to show you the complete process of connecting and disconnecting the GPU.

11:03 Before you start, you need to connect the GPU to the tow hook of the tug so that you can transport it. It's quite simple. You need to back up the tug so that the hook is close to coupling with the GPU. Then get out of the tug, approach the rear, and follow the action displayed on the screen to couple them together.

15:33 Now I'll teach you how to operate a ground power unit which is known as GP GPU in aviation jargon. You're probably wondering what exactly does the GPU do besides what its name gives away. Let me explain that to you. After landing, the aircraft generates electricity from the engines. But as you may have noticed, the aircraft shuts down its engines faster than we can connect and start the

16:01 GPU. Shortly after landing, the crew start the auxiliary power unit or APU for short, which will generate electricity for the aircraft until we, the ground handling crew, connect the GPU to the aircraft, which will power the aircraft more efficiently and at a lower fuel price. During this time, the cockpit crew and ground handling can perform their assigned tasks without a cut in power to the aircraft.

16:31 Okay, now you need to use the tug parked in the marked area and transport the GPU to the position next to the aircraft. There's already an aircraft parked there which is scheduled to depart soon. This will give us a chance to show you the complete process of connecting and disconnecting the GPU. Before you start, you need to connect the GPU to the tow hook of the tug so that you can transport it. It's quite

17:00 simple. You need to back up the tug so that the hook is close to coupling with the GPU. Then get out of the tug, approach the rear, and follow the action displayed on the screen to couple them together.

17:59 Great. Just remember that you hook and

18:02 unhook other trailers in the same way. Hop back in the tug and head over to the aircraft as indicated. Now detach the GPU from the tug and go

18:31 to the rear side of it where you'll need to open the hatch revealing the control panel.

19:38 Now I'll show you the generator startup sequence. You'll operate it using the controls displayed on screen as we go. Toggle the power on button. This will activate the generator battery. Now you'll need to hold down the engine

20:00 start button for approximately 3 seconds until the engine starts. Now we have to wait 30 seconds until the engine heats up and the oil temperature reaches 80° C. In the meantime, go to

20:30 the nose of the aircraft and open the hatch where the connector is located. Great. Now, on the side of the GPU, there's a slot containing a cable. You need to pick up the cable and plug it into the aircraft's power socket. To pick up the cable, follow the action displayed on screen.

21:04 Connect the cable to the aircraft's power socket. Perfect. Now go back to the panel and switch the engine setting knob from idle to run. Then press the DC output button to the

21:32 on position. Now notify the cockpit crew through the communication panel that they can turn off the APU and switch to GPU power. Open this panel using the controls displayed on screen.

22:56 Navigate to the flight deck option, then APU, and then turn off the APU.

23:10 Great. Now the aircraft is powered only by the GPU and the rest of the ground crew and the aircraft crew can continue with their work. Now it's time to teach you how to disconnect an aircraft's ground power prior to departure. Obviously, we can't just unplug the

23:30 cable and leave the crew without power. When you finish all your other tasks and it's time to disconnect the GPU, you'll need to inform the crew that they can start the APU. We'll teach you how to do that on this aircraft. Head over to the indicated area. Approach the aircraft from the side where the GPU is parked. Your task now is to notify the cockpit

24:01 crew that they may start the APU. To do this, open the communication panel using the controls displayed on screen. Select flight deck APU and start APU. Great. The crew has just started the APU. Go to the back of the aircraft, specifically under its tail, and listen

24:30 to the APU's startup sequence. If you want to remove your protective headphones using the displayed button to check the startup progress, open the tablet and select the aircraft you're currently at. In the task table, you'll find information about the startup progress.

25:15 The APU is now fully operational. Now go to the panel and switch the DC output to off.

25:36 Then turn the engine switch from run to idle. Finally, unplug the cable connected to the aircraft and place it back into the GPU. Great. Everything went according to plan. Now you need to return the GPU to the designated location at the parking

26:02 ramp to complete the tutorial. Heat. Heat.

26:47 Congratulations. You've just learned how to operate the GPU after arrival and before departure of an aircraft. See you later.

27:22 You will now learn how to operate the passenger stairs. Generally, there are two common ways to disembark an aircraft. Via jetway or stairs. There

27:33 should be a passenger stairs vehicle nearby. walk up to it and get behind the wheel. There are several ways to access an aircraft. Today, we will show you how to operate the passenger stairs vehicle. As you can see, it's equipped with a movable stairs platform that can move up and down to adjust to the different door heights of various aircraft types. This solution is used at airport parking

28:01 stands where a jetway may not be present or at the rear of an aircraft where a jetway can't reach. The vehicle is located near the terminal in the parking area. Get into it. Okay. An aircraft is waiting for you at one of the stands. Drive around to the indicated L1 door area and park the

28:31 stairs vehicle opposite the door with the stairs facing it. Remember that the left side of the aircraft is always designated for passenger or crew service. So no matter what type of aircraft it is, you will always approach the stairs from the left side. Now that you're in place, you need to slowly move closer to the aircraft door. To make it easier for you, switch the camera to the outside view using the

29:01 button displayed on the screen.

29:30 Heat. Heat. Slowly approach the lower edge of the door. To

30:03 make things a little easier, on the dashboard of the vehicle's cab, you will see two illuminating lights, one red and one green. The red light indicates that you aren't correctly aligned with or near enough to the door. The green light blinks when you are at the ideal distance from the aircraft's door to deploy the vehicle's standing supports and to raise the stairs platform if necessary.

30:30 When the light illuminates a solid green color, it means the vehicle is in place and secured. This indicates that you can continue up the stairs and safely open the door. Remember not to slam the vehicle into the aircraft. The lip of the stairs only needs to be barely touching the edge.

31:16 Heat.

31:36 Heat. down.

32:08 Heat.

32:55 Heat. Heat.

33:21 Heat. Heat. Heat. Heat.

33:56 Heat.

34:15 Heat.

35:16 Heat.

35:30 Heat. Heat. Heat.

36:00 Heat. Heat.

36:33 Heat. Heat. Heat. Heat.

37:04 Heat.

37:34 Heat.

40:07 Heat. Heat.

40:47 Heat.

41:04 Heat.

42:54 Heat. Heat.

43:20 Heat.

43:40 Heat.

45:10 Heat. Heat.

45:49 Heat. Heat. Heat.

46:14 Heat.

46:32 Heat up here.

47:01 Heat up here. Heat up

47:32 here. Heat.

48:00 Heat. Heat. Heat. Heat.

48:44 Heat. Heat. Heat.

49:11 Heat. Heat.

51:52 Heat.

52:03 Heat.

52:54 Heat. Heat.

53:18 Heat. Heat.

54:17 Heat.

54:37 Heat. Heat. Heat.

56:20 Heat.

56:50 Heat. Heat.

57:11 Heat. Heat.

57:48 Heat. Heat. Heat. Heat.

58:24 Heat. Heat.

59:16 Heat. Heat.

59:34 Heat.

1:00:02 Heat. Heat. Heat. Heat.

1:00:34 Heat up here.

1:01:21 Heat. Heat.

1:01:44 Heat. Heat.

1:03:32 Heat. Heat.